Status: Field validation
Bus Passenger Counting System
See how many passengers actually board and alight at each door.
Status: In pilot Video Analytics and Plate Recognition
Road Safety Video Analytics System
The operator no longer has to watch every screen; the system raises an alarm when something happens.
Current status: Pilot (POC) with municipalities; tested on intersection cameras.
Today and with EntropyWork
Drag the slider to compare today with EntropyWork.
Road Safety Video Analytics System: today's situation compared with the EntropyWork solution
Today
Not every event is caught
The operator watches many cameras by eye.
With EntropyWork
The system catches the event
An alarm and a screenshot reach the operator as it happens.
The situation today
Institutions today monitor road safety in real time from connected cameras. In addition, if the cameras have their own analytics features, they use those, or alarms coming through VMS (variable message systems).
How it works, in four steps
Pick a step to follow the data from the field to the center.
Step 01
Existing IP cameras
Any brand
Step 02
Network endpoint
Connection provided by the institution
Step 03
Local analysis
Video is processed on site
Step 04
Operator alarm
Instant alert and screenshot
Operating principle
- The institution gives us a network endpoint; the existing camera infrastructure is not changed.
- The system connects to the cameras through this network endpoint and starts monitoring the video.
- The video is analyzed according to the selected analysis categories; processing is done locally on a Jetson Orin NX.
- When a violation or event is detected, the alarm information and a screenshot are transferred to the center.
- An instant alert goes to the operator; if the event is critical, notifications are made more frequently.
Only the data needed to provide integration between units is transferred to the center.
Key features
- Works with existing cameras
- Edge processing
- Instant alarms
- Installed in about 30 minutes
All features
- Pedestrian, object and tractor detection
- Detection of whether trucks and large vehicles are in the correct lane
- Average speed measurement
- Alarm when there is a pedestrian where there should be none
- Detection of unidentified objects
- A low-cost processing unit for up to 6 cameras; for more cameras only a hardware upgrade, the software stays the same
- Compatibility with all ONVIF-capable cameras and all cameras that deliver video over RTSP
Details
Only confirmed values are listed.
Technical specifications
Technical specifications
| Feature | Value / Status |
|---|---|
| Processing unit | Jetson Orin NX |
| Camera capacity | Up to 6 cameras (hardware upgrade for more) |
| Processing | Local (edge) |
| Camera compatibility | All ONVIF-capable cameras, all cameras that deliver video over RTSP |
| Analysis categories | Pedestrian, object, tractor, lane (trucks and large vehicles), average speed |
| Accuracy | No measured value has been provided (tested on intersection cameras) |
System components
| Component | Function |
|---|---|
| Existing IP cameras | Cameras the institution already uses; not replaced. |
| Network endpoint | The connection point provided by the institution; the system accesses the cameras from here. |
| Jetson Orin NX processing unit | Analyzes the video locally. |
| Central software | Receives the alarm and screenshot and sends a notification to the operator. |
| Notification channels | Operator alert; SMS, email and mobile application integration if desired. |
Integration
Integration
The system connects to the existing camera infrastructure through a network endpoint provided by the institution; no changes are made to the camera infrastructure. It works with ONVIF- and RTSP-capable cameras.
SMS, email and mobile application integration is provided if desired. Data is transferred to the center to provide integration between units.
Outputs and reporting
- Instant alarm and alert to the operator; more frequent notifications for critical events
- Screenshot of the alarm
- SMS, email and mobile application integration if desired
Installation and support
Installation
Installation takes about 30 minutes; no physical intervention is made.
Installation time varies by product and site.
Support, maintenance and warranty
- Remote update is available.
- Maintenance is performed once a year.
Data and security
- Images are not recorded; only alarm data is kept.
- Analysis is performed locally; only the data needed for integration is transferred to the center.
Areas of use
- KGM
- Municipalities
- Highway operators
Talk to us about this product
Fill in the form; the product name is added for you.
Talk to us about this product
Fill in the form; the product name is added for you.
Prefer e-mail? info@entropywork.com
Other solutions in this area
- Status: In pilot
Parking Violation Penalty Processing Integration
Detect parking violations with evidence, without scanning recordings one by one.
- Status: In pilot
Smart Intersection Analytics System
Vehicle counting and classification from intersection cameras, with the most suitable signal timings calculated from several intersections together.
